Single disk is not seen in sysconfig -a on AFF A800

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

Views:: 294

Visibility:: Public

Votes:: 0

Category:: fas-systems

Specialty:: hw

Last Updated:

Applies to

AFF-A800
Disk model
- X4013A
- X4014A

Issue

While there no failed disks in following command output:

cluster::> storage disk show -container-type broken, pending,

maintenance

There are no entries matching your query.

The affected disk does not show in the storage disk show command or in (nodeshell) sysconfig -a command output:

cluster::> node run -node node1 -command sysconfig -a

<snip>

slot 0: Virtual NVMe Host Adapter 0n

<snip>

  38   : NETAPP   X4013S17337T6NTE NA53 7325.4GB 4160B/sect (S60RNABC111111)

  39   : NETAPP   X4013S17337T6NTE NA53 7325.4GB 4160B/sect (S60RNABC111112)

  40   : NETAPP   X4013S17337T6NTE NA53 7325.4GB 4160B/sect (S60RNABC111113)

  41   : NETAPP   X4013S17337T6NTE NA53 7325.4GB 4160B/sect (S60RNABC111114)

  43   : NETAPP   X4013S17337T6NTE NA53 7325.4GB 4160B/sect (S60RNABC111115)

  44   : NETAPP   X4013S17337T6NTE NA53 7325.4GB 4160B/sect (S60RNABC111116)

  45   : NETAPP   X4013S17337T6NTE NA53 7325.4GB 4160B/sect (S60RNABC111117)

  46   : NETAPP   X4013S17337T6NTE NA53 7325.4GB 4160B/sect (S60RNABC111118)

  47   : NETAPP   X4013S17337T6NTE NA53 7325.4GB 4160B/sect (S60RNABC111119)

In the above output, disk in slot 42 is installed in the chassis but does not show in these outputs from either node.