Skip to main content

This Site will be down for up to 3 hours on December 2, 2023 from 8 PM - 11 PM PST, to deploy an infrastructure update.

NetApp Knowledge Base

SP inaccessible with e0M up and functioning

Last Updated:

Applies to

  • FAS 8020


  • The Service Processor IP address is inaccessible on one node of the HA pair, the network connectivity was verified but the SP IP does not respond to pings.
  • The Cluster management and node management LIFs on the affected node, hosted on the e0M port, are functioning normally as they are pingable and accessible.
  • The MAC address for the Service Processor is not seen on the connected switch port, although the MAC addresses for the e0M port is seen.
  • The Service Processor was rebooted, and the firmware was attempted to be upgraded, which failed:
::> system service-processor reboot-sp -node <node name>
  • Service Processor upgrade failure (SP-MGMT-MLOG-TXT.GZ in Autosupport):
Jan 13 22:44:34 +0000 [node01: servprocd: sp.servprocd.upd.unexpt.evts:debug]: params: {'reason': 'Unable to transfer SP firmware image using network interface'}
[?] Thu Jan 13 22:44:34 +0000 [node01: servprocd: sp.servprocd.upd.error:error]: SP update error: SP firmware update failure has been detected.
[?] Thu Jan 13 22:45:00 +0000 [node01: nphmd: hm.alert.raised:alert]: Alert Id = SPAutoUpgradeFailedMajorAlert , Alerting Resource = SP Upgrade raised by monitor controller
[?] Thu Jan 13 22:46:22 +0000 [node01: servprocd: sp.servprocd.upd.evts:debug]: params: {'reason': 'SP Firmware network update from 3.10 to 3.11 has been triggered.'}
[?] Thu Jan 13 22:46:34 +0000 [node01: notifyd: callhome.ondemand.invoke.all:notice]: params: {'aod_req_id': '61e0a0969f3f553997c0cd32', 'sequence': '472', 'URI': '', 'subject': 'ON DEMAND (ALL:AODS TRIGGERED)'}

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device