Skip to main content
NetApp Knowledge Base

Host I/O errors cause Oracle Linux Database outage

Views:
242
Visibility:
Public
Votes:
0
Category:
aff-series
Specialty:
san
Last Updated:

Applies to

ONTAP

Issue

  • In a FC/FCOE connection and Oracle Linux servers environment, production Database VM went down because of reported Host I/O errors.
  • EMS log show link break and fabric login change (FLOGI) on two target ports within 1 minute of each other.
event log show -time > 100m -message-name *fct*

Node 1:
fct_tpd_work_thread_0: scsitarget.ispfct.linkBreak:error]: Link break detected on Fibre Channel target adapter 0f. Firmware status code status1 0x2, status2 0x7, and status4 0x0.

Node 2:
fct_tpd_work_thread_0: fcp.io.status:debug]: STIO Adapter:0f AEN 0x8048 (RECV_ERROR) MboxStatus1 0x17c MboxStatus2 0x20
fct_tpd_work_thread_0: scsitarget.fct.linkError:error]: FC target HBA: 0f received unexpected error: RECV_ERROR, AEN Status1: 0x8048, Status2: 0x17c, Status3: 0x20.
fct_tpd_work_thread_0: scsitarget.ispfct.linkBreak:error]: Link break detected on Fibre Channel target adapter 0f. Firmware status code status1 0x2, status2 0x7, and status4 0x0.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.