Skip to main content
NetApp Knowledge Base

Health Monitor Reports "Redundant configuration is missing for cluster switches."

Views:
452
Visibility:
Public
Votes:
1
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • All FAS systems
  • Switched cluster configurations

Issue

Health alerts are generated reporting "Redundant configuration is missing for cluster switches."

::> system health alert show -alert-id ClusterSwitchMissing_Alert -instance
                      Node: node1
                   Monitor: cluster-switch
                  Alert ID: ClusterSwitchMissing_Alert
         Alerting Resource: cluster1-02
                 Subsystem: Switch-Health
           Indication Time: Wed Nov 27 10:22:08 2019
        Perceived Severity: Major
            Probable Cause: Configuration_error
               Description: Redundant configuration is missing for cluster switches.
        Corrective Actions: 
                         1) Ensure that a redundant pair of cluster switches exists in the network.
                         2) Ensure that cluster ports are connected to both switches.
                         3) Enable the Cisco Discovery Protocol (CDP)/Industy Standard Discovery Protocol(ISDP)
                         on switches, if you previously disabled it. CDP/ISDP is enabled by default.
                         Refer to your switch documentation for instructions.
                         4) If Data ONTAP cannot automatically discover a switch, use the "system cluster-switch create"
                         command to configure discovery and monitoring of the switch.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device