Skip to main content
NetApp Knowledge Base

FCP WQE error repeats during high latency system operation

Last Updated:

Applies to

  • ONTAP 9.x
  • Emulex LPe32000 FCP target port


scsitarget.slifct.wqeError and repeats from Emulex FCP target port(Emulex LPe32000 (LPe32002) rev. 12) during high latency system operation.
7/23/2021 04:05:48  FAS-01  DEBUG  scsitarget.slifct.wqeError: FC port 10a has a WQE processing failure of type SLI_IO_ABORT, command N/A, subtype x0, with status of 3 and an extended status x5 for NPIV port 3.
7/23/2021 04:05:48  FAS-01  DEBUG STIO Adapter:10a IO WQE failure, Handle 0x6, S_ID: C70160, OX_ID: F56, Status 0x3 Ext_Status 0x5
7/23/2021 04:05:49  FAS-01  ERROR  wafl.cp.toolong: Aggregate aggr1 experienced a long CP.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device