Skip to main content
NetApp Knowledge Base

FAS8020 BIOS POST Failure(s) detected: SP IPMI failure. Abort AUTOBOOT

Views:
622
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
HW
Last Updated:

Applies to

FAS8020

Issue

  • Both nodes shut down and fail to boot
  • Motherboards re-seated but nodes are held at LOADER prompt
  • Upon attempt to boot:

PortionsCopyright (c) 2011-2014 NetApp. All Rights Reserved
Waiting for SP...
SP failure.Resetting SP from primary FW. This can take a few minutes
Waiting for SP...
SP failure.Resetting SP from backup FW. This can take a few minutes
Waiting for SP...
Failed torecover SP
IPMI PCI SlotControl failed.
IPMI:Getcontroller FRU inventory:failed
PhoenixSecureCore Tiano(TM)
Copyright1985-2022 Phoenix Technologies Ltd.
All RightsReserved
Build Date:12/02/2014
**********************************************
*                   9.3                    *
*    ==================================     *
*          PHOENIX SC-T2009-2022           *
**********************************************
CPU = 1Processor(s) Detected, Cores per Processor = 6
Intel(R) Xeon(R)CPU E5-2620 @ 2.00GHz
24576 MB SystemRAM Installed
256 KB L2 Cache
System BIOSshadowed
Video BIOSshadowed
USB Device:MICRON eUSB DISK
Boot Loaderversion 5.3
Copyright (C)2000-2003 Broadcom Corporation.
PortionsCopyright (C) 2002-2014 NetApp, Inc. All Rights Reserved.
BIOS POSTFailure(s) detected: SP IPMI failure. Abort AUTOBOOT
LOADER-A>

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.