Skip to main content
NetApp Knowledge Base

Disk Shelf cannot recognize one IOM Module

Views:
211
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • DS212-12
  • DS224-12
  • Reseating a faulty IOM12 has not resolved this issue

Issue

  • Disk Shelf cannot recognize one IOM Module.
  • IOM Module LED is not bright.

ENVIRONMENT.txt
Shelf: XXX
          SES device path: local access: 0b.XXX.99
          Module type: IOM12; monitoring is active
         Shelf status: critical condition
          SES Configuration, shelf XXX:
          vendor identification=NETAPP
          product identification=DS212-12
          product revision level=0220
          Vendor-specific information:

STORAGE-FAULT.txt
Vendor Unique Element 83-IOM12: (SAS)
Element Status         Status Bytes  Status Descriptions
  1 [IOM12 A]    : OK                01,08,00,20   MASTER, RESERVED
  2: NOT INSTALLED     05,00,00,00
Vendor Unique Element 85-IOM12: (ACP)
Element Status         Status Bytes  Status Descriptions
  1 [IOM12 A]    : CRITICAL          02,18,00,40   FAIL
  2: NOT INSTALLED     05,18,00,00

sysconfig -a:
                       Shelf 0: DS212-12  Firmware rev. IOM12E A: 01XXX  IOM12E B: 01XXX
                       Shelf XXX: DS212-12  Firmware rev. IOM12 A: 0220       B: ----                       
                       Shelf 11: DS212-12  Firmware rev. IOM12 A: 0220  IOM12 B: 0220
                       Shelf 12: DS212-12  Firmware rev. IOM12 A: 0220  IOM12 B: 0220

  • Reseat or replace Shelf XXX IOM12 B module has not resolved this issue.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.