Skip to main content
NetApp Knowledge Base

Amber LED lit on flash cache card without hardware failure

Views:
196
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

Applies to

  • All FAS platform
  • All AFF platform

Issue

  • The flash cache card status normal

slot 6-1: Flash Cache NVMe
    Serial Number:      47XXXXXXXXMU
    Part Number:        119-00207
    Hardware Revision:  A1
    Firmware Version:   NA05
    Firmware File:      X9170_O000Z6300NVM
    Model Name:         X9170A
    Capacity:           1024 GB
    State:              ok

  • Amber LED lit on the card.

FRU LEDs status
======================
FRU LED ID 39 = SFM61 FAULT LED
FRU LED ID 39 is on

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.