Skip to main content
NetApp Knowledge Base

AFF-A320 is missing a path to one module on shelf NS224NSM100

Last Updated:

Applies to

  • AFF A320
  • NS224


  • Node missing path to shelf module in storage check-cables output. Example:

cluster::> storage check-cables
[Error: DualPathToNSM] There are two ports cabled from node "node_name" to topmodule (A) on Shelf with SN serial_number:
        Port e0b on node is connected to port e0b of top module (A) on Shelf with SN serial_number.
        Port e0e on node is connected to port e0a of top module (A) on Shelf with SN serial_number.
One of these cables should be removed.
[Error: MissingRedundantPath] Node "node_name" is missing a path to bottom module (B) on Shelf with SN serial_number.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device