Skip to main content
NetApp Knowledge Base

Unbale to reset root Password on Brocade G610

Last Updated:

Applies to

Brocade G610


The procedure to reset the password is stuck at mounting the environment variables.

       scanning usb for storage devices... 1 Storage Device(s) found
*** badly formed bootargs in environment for GOS 0 ***
Hit ESC to stop autoboot:  0 
1) Start system.
2) Recover password.
3) Enter command shell.
Option? 3
Boot PROM password has not been set.
=> setenv bootargs 'root=/dev/sda$prt rootfstype=ext4 console =ttys0, 9600 quite single'
=> saveenv
Saving Environment to NVRAM...
=> printenv
=> boot
=> mount -vo remount,rw,noatime /
Unknown command 'mount' - try 'help'
=> mount -vo remount,rw,notime /
Unknown command 'mount' - try 'help'

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device