Applies to Brocade G610 The procedure to reset the password is stuck at mounting the environment variables. scanning usb for storage devices... 1 Storage Device(s) found *** badly formed bootargs in e...Applies to Brocade G610 The procedure to reset the password is stuck at mounting the environment variables. scanning usb for storage devices... 1 Storage Device(s) found *** badly formed bootargs in environment for GOS 0 *** Hit ESC to stop autoboot: 0 2) Recover password. Boot PROM password has not been set. => setenv bootargs 'root=/dev/sda$prt rootfstype=ext4 console =ttys0, 9600 quite single' Saving Environment to NVRAM... Unknown command 'mount' - try 'help'
Applies to Brocade G610 Switch Brocade 300 Switch Issue Brocade switch suddenly turned off and does not power on. Below steps need to be tried to isolate the issue further- Check if power cords are ti...Applies to Brocade G610 Switch Brocade 300 Switch Issue Brocade switch suddenly turned off and does not power on. Below steps need to be tried to isolate the issue further- Check if power cords are tightly plugged in, on switch end and on power source. Try connecting the power cord to a different power source. Try powercycling the switch. If issue persists, contact NetApp Technical Support and proceed to the solution.
