Skip to main content
NetApp Knowledge Base

SRP Infiniband port down on EF600 HIC

  1. Last updated
  2. Save as PDF
Views:
51
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg
Last Updated:

Applies to

  • EF600
  • HIC utilizing SRP over Infiniband

Issue

SRP over Infiniband port not active
 
From Storage Array Profile:
      Host interface:                  SRP over InfiniBand
         Host Interface Card(HIC):     1
         Channel:                      1
         Port:                         1a
         Local Identifier:             65535/0xFFFFFFFF
         Global Identifier:            FE8000000000-000008C0EB0300508FD5
         Supported data rates:         10 Gbps, 20 Gbps, 40 Gbps, 56 Gbps, 100 Gbps
         Current data rate:            Not available
         Supported Link Width:         1x, 4x
         Current Link Width:           4x
         Maximum Data Virtual Lanes:   4
         Current Data Virtual Lanes:   4
         Maximum Transmission Packet:  4096
         Link Status:                  Down    
         Port Status:                  Polling 
         Data Assurance (DA) capable:  No

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.