Skip to main content
NetApp Knowledge Base

E-Series iSCSI connection reports 1815/1814/180D errors frequently

Views:
284
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg
Last Updated:

Applies to

E-Series

Issue

  • The controller reports below errors:
    • Event type: 1815 ISCSI carrier has been lost
    • Event type: 1814 ISCSI carrier has been detected
    • Event type: 180D Session terminated unexpectedly
  • iscsi-statistics.csv records lots of CRC errors within MAC receive statistics:

NOTE: FCRCE = Frame CRC Error Count

E-Series iSCSI connection reports

  • The error counters under STATE-CAPTURE-DATA -> iscsiStateCapture ->  showIscsiStats(ISCSI_STATISTICS_RAW) indicates that all errors are from Rx (Receiving in):

    ========================================================================
                        ETHERNET PORT STATISTICS - PORT 0
    ========================================================================
      Port Rx Frame CRC Err Count     0xbdef6 

    ========================================================================
                            IP ENDPOINT STATISTICS - PORT 0
    ========================================================================
      IPV4 Received Pdus                0x0
      IPV4 Sent Pdus                    0x0
      IPV4 Reassembly Required          0x0
      IPV4 Fragmentation                0x0
      IPV4 Fragmented Pdus Created      0x0
      IPV4 Tx Byte Count                0x0
      IPV4 Rx Byte Count                0x0
      IPV4 Rx Error Count               0x3eff 

  • But the target port (e0a) shows normal status:

Hostinterface:    iSCSI
HostInterfaceCard(HIC):    Baseboard
Channel:    1
Port:    e0a
Linkstatus:    Connected

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.