Skip to main content
NetApp Knowledge Base

'SensorReadingFailed': IPMI diagnostics are currently unresponsive on Element software

  1. Last updated
  2. Save as PDF
Views:
9,342
Visibility:
Public
Votes:
1
Category:
element-software
Specialty:
solidfire
Last Updated:

​ ​

Applies to

  • NetApp Element software
  • NetApp H-series storage nodes
  • NetApp SF-Series storage nodes

Issue

NetApp SolidFire Active IQ reports the following alert:

  • NetApp Element software 12.7:
    • sensorReadingFailed: IPMI diagnostics are currently unresponsive. Please contact support if this problem persists.
    • BmcSelfTestFailed: BMC Self Test failed. This may impact IPMI based services and a BIOS/BMC update may be recommended.
  • NetApp Element software 12.5:
    • sensorReadingFailed: IPMI diagnostics are currently unresponsive. Please contact support if this problem persists.
    • BmcSelfTestFailed: BMC Self Test failed. This may impact IPMI based services and a BIOS/BMC update may be recommended.
  • NetApp Element Software 12.3:
    • sensorReadingFailed: IPMI diagnostics are currently unresponsive. Please contact support if this problem persists.
    • sensorReadingFailed: BMC Self Test failed. This may impact IPMI based services and a BIOS/BMC update may be recommended.
  • NetApp Element software 12.2:
    • nodeOffline: The SolidFire Application cannot communicate with node ID <#>.
    • sensorReadingFailed: IPMI diagnostics are currently unresponsive. Please contact support if this problem persists.
    • sensorReadingFailed: BMC Self Test failed. This may impact IPMI based services and a BIOS/BMC update may be recommended.
  • NetApp Element software 11.x and 12.0:
    • nodeOffline: The SolidFire Application cannot communicate with node ID <#>.
    • sensorReadingFailed: IPMI diagnostics are currently unresponsive. Please contact support if this problem persists.
    • sensorReadingFailed: BMC Self Test failed. This may impact IPMI based services and a BIOS/BMC update may be recommended.
  • NetApp Element software 10.x or earlier:
    • sensorReadingFailed: BMC Self Test failed. This may impact IPMI based services and a BIOS/BMC update may be recommended.

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.