Skip to main content
NetApp Knowledge Base

CNA port does not come online with scsitarget.fcp.sfp.warning

  1. Last updated
  2. Save as PDF
Views:
436
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
SAN
Last Updated:

Applies to

A700

Issue

CNA port does not come online with below error message.
 
7/6/2022 13:35:59 A700-01 ERROR scsitarget.fcp.sfp.warning: The SFP in FC adapter 9c does not support 10 Gbit/sec speed. FCoE is supported only at 10 Gbit/sec and so the FCoE link will not be online.
 
  1. The SFP module is supported by UTA2/CNA card. Hardware Universe(HU)
  • UTA2/CNA card part number(P/N): X91143A
  • SFP module part number(P/N): X6567-R6 
  1. The port mode is cna.

A700::*> ucadmin show
                       Current  Current    Pending  Pending    Admin
Node          Adapter  Mode     Type       Mode     Type       Status
------------  -------  -------  ---------  -------  ---------  -----------
A700-01  9a    cna      target     -        -          online
A700-01  9b    cna      target     -        -          online
A700-01  9c    cna      target     -        -          online
A700-01  9d    cna      target     -        -          online
A700-02  9a    cna      target     -        -          online
A700-02  9b    cna      target     -        -          online
A700-02  9c    cna      target     -        -          online
A700-02  9d    cna      target     -        -          online

  1. sysconfig -a

    slot 9: 1G/10G Ethernet Controller CNA EP 8324
                         (Multiple Dual-port, QLogic CNA 8324(8362) rev. 2)
                          e9d MAC Address:    d0:39:ea: xx:xx:xx (auto-unknown-fd-down)
                          e9c MAC Address:    d0:39:ea: xx:xx:xx (auto-unknown-fd-down)
                          e9b MAC Address:    d0:39:ea: xx:xx:xx (auto-unknown-fd-down)
                          e9a MAC Address:    d0:39:ea: xx:xx:xx (auto-unknown-fd-down)
                          Device Type:        EP8324N
                          Firmware Version:   5.4.66.0
                          Part Number:        111-02397
                          Hardware Revision:  A3
                          Serial Number:      xxxxxxxxxxxx
        slot 9: Fibre Channel Target Host Adapter 9a
               (QLogic CNA 8324 (8362) rev. 2, <LINK NOT CONNECTED>)
                Firmware rev:      8.9.0
                Flash rev:         6.0.1
                Host Port Addr:    000000
                FC Nodename:       50:0a:09:80:xx:xx:xx:xx (500a0980XXXXXXXX)
                FC Portname:       50:0a:09:88:xx:xx:xx:xx (500a0980XXXXXXXX)
                Connection:        No link
                Switch Port:       Unknown
                                SFP Vendor Name:   AVAGO
                                SFP Vendor P/N:    AFBR-5710PZ-NA2
                                SFP Vendor Rev:
                                SFP Serial No.:    xxxxxxxxxxx
                                SFP Connector:     LC
                                SFP Capabilities:  1 Gbit/Sec
        slot 9: Fibre Channel Target Host Adapter 9b
                (QLogic CNA 8324 (8362) rev. 2, <LINK NOT CONNECTED>)
                Firmware rev:      8.9.0
                Flash rev:         6.0.1
                Host Port Addr:    000000
                FC Nodename:       50:0a:09:80:xx:xx:xx:xx (500a0980XXXXXXXX)
                FC Portname:       50:0a:09:80:xx:xx:xx:xx (500a0980XXXXXXXX)
                Connection:        No link
                Switch Port:       Unknown
        slot 9: Fibre Channel Target Host Adapter 9c
                (QLogic CNA 8324 (8362) rev. 2, <LINK NOT CONNECTED>)
                Firmware rev:      8.9.0
                Flash rev:         6.0.1
                Host Port Addr:    000000
                FC Nodename:       50:0a:09:80:xx:xx:xx:xx (500a0980XXXXXXXX)
                FC Portname:       50:0a:09:80:xx:xx:xx:xx (500a0980XXXXXXXX)
                Connection:        No link
                Switch Port:       Unknown
                                SFP Vendor Name:   AVAGO
                                SFP Vendor P/N:    AFBR-5710PZ-NA2
                                SFP Vendor Rev:
                                SFP Serial No.:    xxxxxxxxxxx
                                SFP Connector:     LC
                                SFP Capabilities:  1 Gbit/Sec
        slot 9: Fibre Channel Target Host Adapter 9d
                (QLogic CNA 8324 (8362) rev. 2, <LINK NOT CONNECTED>)
                Firmware rev:      8.9.0
                Flash rev:         6.0.1
                Host Port Addr:    000000
                FC Nodename:       50:0a:09:80:xx:xx:xx:xx (500a0980XXXXXXXX)
                FC Portname:       50:0a:09:80:xx:xx:xx:xx (500a0980XXXXXXXX)
                Connection:        No link
                Switch Port:       Unknown

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.