Skip to main content
NetApp Knowledge Base

What are recommendations when powering off ONTAP Storage with Solid-State Drives (SSD) for an extended period of time?

  1. Last updated
    Jan 23, 2023
  2. Save as PDF
Views:
465
Visibility:
Public
Votes:
0
Category:
disk-drives
Specialty:
hw
Last Updated:
1/23/2023, 5:50:03 PM

Applies to

  • ONTAP
  • Storage maintenance
  • Solid-State Drives (SSD)

Answer

Log in to review customer bulletin SU490 for information on SSD Best Practices.

  • SSDs based on NAND flash memory will slowly leak charge over time if left for long periods without power. Per the JEDEC Solid State Technology Association, SSDs should not be unpowered for more than 2-3 months. Otherwise, the data might not be recoverable when power is reapplied. According to the JEDEC Solid State Technology Association report, the amount of time until data is at risk varies depending on the amount of wear on the SSDs and the temperature of the environment in which they are stored.    

Additional Information

N/A

 

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.