Skip to main content
NetApp Knowledge Base

Solaris FC hosts lost connectivity during switchover/switchback

Last Updated:

Applies to

  • FC
  • ONTAP 9
  • MetroCluster
  • Solaris


FC hosts lost connectivity during switchover/switchback

  • Host messages(Solaris):

Apr 24 10:05:31 Solaris fctl: [ID 517869 kern.warning] WARNING: fp(0)::N_x Port with D_ID=12602, PWWN=200700a098680a8c reappeared in fabric

Apr 24 10:05:31 Solaris fctl: [ID 517869 kern.warning] WARNING: fp(2)::N_x Port with D_ID=22602, PWWN=200500a098680a8c reappeared in fabric

Apr 24 10:05:32 Solaris genunix: [ID 483743] /scsi_vhci/disk@g600a09803830357452244c2d45734162 (sd23) multipath status: failed: path 32 fp2/disk@w200500a098680a8c,4 is offline
Apr 24 10:05:32 Solaris genunix: [ID 408114] /scsi_vhci/disk@g600a09803830357452244c2d45734159 (sd24) offline
Apr 24 10:05:41 Solaris fmd: [ID 377184 daemon.error] SUNW-MSG-ID: ZFS-8000-FD, TYPE: Fault, VER: 1, SEVERITY: Major

  • NetApp EMS shows that initiators are logged in:

Fri Apr 24 10:05:31 CEST [NetApp_N1: fct_tpd_work_thread_0: scsitarget.fct.portLogin:notice]: Login at target FC port: '3b' by initiator port: '21:00:00:24:ff:3e:be:27' address 0x20d00. The target virtual port is: 'NetApp FC Target Port (8324) FC_01-mc:MCC_LIF_02'.

  • But igroup is empty:

::> igroup show -vserver svm_mcc -igroup FC-mcc
          Vserver Name: svm_mcc
           Igroup Name: FC-mcc
              Protocol: fcp
               OS Type: solaris
Portset Binding Igroup: -
           Igroup UUID: 659941e0-d591-11ea-8555-005056a4dc7a
                  ALUA: true
            Initiators: -

  • DR Configuration failed AutoSupport

Fri Apr 24 11:44:34 CEST [NetApp_N1: crs: callhome.dr.apply.failed:error]: Call home for DR CONFIG REPLICATION FAILED

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.