Skip to main content
NetApp Knowledge Base

Shelf temperature sensor alert and automatic recovery in a short time on ONTAP

  1. Last updated
    Oct 29, 2024
  2. Save as PDF
Views:
722
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
HW
Last Updated:
10/29/2024, 9:30:05 PM

Applies to

  • ONTAP 9
  • All Platform

Issue

  • Shelf sensor alerts are raised and cleared intermittently:

Sun Feb 25 22:32:02 +0000 [netapp-02: dsa_worker3: ses.status.temperatureWarning:alert]: DS224-12 (S/N XXXXXXXXXXXX) shelf 0 on channel 0b temperature warning for Temperature sensor 11: non-critical status; undertemperature warning. Current temperature: 0 C (32 F). This module is on the rear of the shelf at the top left, on shelf module A.
Sun Feb 25 22:32:02 +0000 [netapp-02: dsa_worker3: ses.status.temperatureWarning:alert]: DS224-12 (S/N XXXXXXXXXXXX) shelf 0 on channel 0b temperature warning for Temperature sensor 14: non-critical status; undertemperature warning. Current temperature: 0 C (32 F). This module is on the rear of the shelf at the top right, on shelf module B.

Sun Feb 25 22:32:11 +0000 [netapp-02: statd: monitor.shelf.warning:error]: Fault reported on disk storage shelf attached to channel 0b. Check fans, power supplies, disks, and temperature sensors.
Sun Feb 25 22:32:47 +0000 [netapp-02: dsa_worker2: ses.status.temperatureInfo:info]: DS224-12 (S/N XXXXXXXXXXXX) shelf 0 on channel 0b temperature information for Temperature sensor 11: normal status.
Sun Feb 25 22:32:47 +0000 [netapp-02: dsa_worker2: ses.status.temperatureInfo:info]: DS224-12 (S/N XXXXXXXXXXXX) shelf 0 on channel 0b temperature information for Temperature sensor 14: normal status.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.