Skip to main content
NetApp Knowledge Base

SAS port PHY disabled after motherboard replacement

Views:
24
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
HW
Last Updated:

Applies to

  • ONTAP 9
  • FAS2720
  • No external shelf attached

Issue

  • SAS port PHY disabled after motherboard replacement.

SYSCONFIG -A:

slot 0: SAS Host Adapter 0a (PMC-Sierra PM8070 rev. C, SAS, )
Firmware rev: 03.08.09.00
Temperature: Not Available
Phy State: [0] Disabled
           [1] Disabled
           [2] Disabled
           [3] Enabled, 12.0 Gb/s

slot 0: SAS Host Adapter 0b (PMC-Sierra PM8070 rev. C, SAS, )
Firmware rev: 03.08.09.00
Temperature: Not Available
Phy State: [4] Disabled
           [5] Disabled
           [6] Disabled
           [7] Enabled, 12.0 Gb/s

  • Partner node have SAS port attention led on though SAS port PHY state is normal.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.