Skip to main content
NetApp Knowledge Base

SAS Host Adapter 0a Offline

  1. Last updated
  2. Save as PDF
Views:
7
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • NetApp AFF-A150 systems
  • ONTAP 9.16.1P1
  • SAS Host Adapter

Issue

  • Customer reported FC adapter errors and observed the following log output for both nodes:

slot 0: SAS Host Adapter 0a (PMC-Sierra PM8070 rev. C, SAS, <OFFLINE (hard)>)
              Firmware rev:       03.08.09.00
              Base WWN:           x:xxxxxx:00xxxxx:xx
              Temperature:        Not Available
              Phy State:          [0] Disabled
                                  [1] Disabled
                                  [2] Disabled
                                  [3] Disabled
              Mini-SAS HD Vendor:        not available
              Mini-SAS HD Part Number:   not available
              Mini-SAS HD Type:          not available
              Mini-SAS HD Serial Number: not available

  • Both node-01 and node-02 show SAS Host Adapter 0a as OFFLINE with all PHYs disabled.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.