Skip to main content
NetApp Knowledge Base

Port on expansion NIC card can't be recognized

Views:
227
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

Applies to

  • ONTAP 9
  • NIC

Issue

Ehternet port on slot2 can't be recognize.

node01::> network port show

 Node: node01-2
                                                                       Ignore
                                                  Speed(Mbps) Health   Health
Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status   Status
 --------- ------------ ---------------- ---- ---- ----------- -------- ------
e0M       Default      bcd_mgmt         up   1500  auto/1000  healthy  false
e0a       Default      -                down 1500  auto/-     -        false
e0b       Default      -                down 1500  auto/-     -        false
e0c       Cluster      Cluster          up   9000  auto/25000 healthy  false
e0d       Cluster      Cluster          up   9000  auto/25000 healthy  false
e1a       Default      -                down 9000  auto/-     -        false
e1b       Default      bcd_iscsi        down 1500  auto/-     -        false
e1c       Default      -                down 1500  auto/-     -        false
e1d       Default      -                down 1500  auto/-     -        false
e2a       Default      -                down 9000  auto/-     -        false
e2b       Default      bcd_iscsi        down 1500  auto/-     -        false
e2c       Default      -                down 1500  auto/-     -        false
e2d       Default      -                down 1500  auto/-     -        false


node01::> network port show

Node: node01-2
                                                                       Ignore
                                                  Speed(Mbps) Health   Health
Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status   Status
--------- ------------ ---------------- ---- ---- ----------- -------- ------
e0M       Default      bcd_mgmt         down 1500  auto/-     -        false
e0a       Default      -                down 1500  auto/-     -        false
e0b       Default      -                down 1500  auto/-     -        false
e0c       Cluster      Cluster          up   9000  auto/25000 healthy  false
e0d       Cluster      Cluster          up   9000  auto/25000 healthy  false
e1a       Default      -                down 9000  auto/-     -        false
e1b       Default      bcd_iscsi        down 1500  auto/-     -        false
e1c       Default      -                down 1500  auto/-     -        false
e1d       Default      -                down 1500  auto/-     -        false

node01::*> system node run -node * -command sysconfig -ac
2 entries were acted on.

Node: node01-1
sysconfig: slot 1 OK: X1152: 4p 25GbE RoCE SFP28
sysconfig: slot 2 OK: X1152: 4p 25GbE RoCE SFP28
sysconfig: No shelf configuration errors detected.
sysconfig: There are no configuration errors.

Node: node01-2
sysconfig: slot 1 OK: X1152: 4p 25GbE RoCE SFP28
sysconfig: No shelf configuration errors detected.
sysconfig: There are no configuration errors.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.