Skip to main content
NetApp Knowledge Base

ONTAP Cluster Switch version source changes after power cycle

  1. Last updated
  2. Save as PDF
Views:
186
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
HW
Last Updated:

Applies to

  • ONTAP 9
  • AFF/FAS systems
  • Cluster Switches

Issue

  • Version source is not matching a previous log protocol
  • After a power cycle and/or upgrade, the system is showing a different version source
    • i.e.
      Before

      Cluster::> system cluster-switch show
      Switch                      Type               Address
      Model
      --------------------------- ------------------ ---------------- ---------------
      SW1
      cluster-network    10.10.10.10   BES-5000
      Serial Number: XXXXXXXXXXXX
      Is Monitored: true
      Reason: None
      Software Version: 3.9.0.2
      Version Source: CDP/ISDP

      SW2             cluster-network    10.10.10.20   BES-5000
      Serial Number:XXXXXXXXXXXX
      Is Monitored: true
      Reason: None
      Software Version: 3.9.0.2
      Version Source:CDP/ISDP

      After​​​

      Cluster::> system cluster-switch show
      Switch                      Type               Address
      Model
      --------------------------- ------------------ ---------------- ---------------
      SW1
      cluster-network    10.10.10.10   BES-5000
      Serial Number: XXXXXXXXXXXX
      Is Monitored: true
      Reason: None
      Software Version: 3.9.0.2
      Version Source: CDP/ISDP


      SW2             cluster-network    10.10.10.20   BES-5000
      Serial Number:XXXXXXXXXXXX
      Is Monitored: true
      Reason: None
      Software Version: 3.9.0.2
      Version Source:SNMP

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.