Skip to main content
NetApp Knowledge Base

How to update the SP/BMC Internal Ethernet switch firmware?

  1. Last updated
  2. Save as PDF
Views:
1,465
Visibility:
Public
Votes:
1
Category:
ontap-9
Specialty:
HW
Last Updated:

Applies to

Platforms Firmware
AFF A700, FAS9000 SP 4.7 , 4.8
AFF A200, FAS2620, FAS2650,AFF A300, FAS8200 SP 5.6P1 , 5.7, 5.8

Description

  • Some NetApp controller families utilize an internal Ethernet switch that may need to be manually updated after the Service Processor (SP) / Baseboard Management Controller (BMC) firmware has been updated.
  • The switch firmware is not automatically updated if the SP/BMC firmware is updated.
    • Verify the switch firmware version after any ONTAP upgrade, and if required manually update the switch firmware according to the instructions for that specific model and SP/BMC version

 

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.