Skip to main content
NetApp Knowledge Base

Cluster communications not working during headswap from 8040 to A400

  1. Last updated
  2. Save as PDF
Views:
169
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • ARL Headswap
  • AFF 8040 to AFF A400

Issue

  • Cluster ports e0a and e0b in use on AFF 8040
  • After swapping to the second new AFF A400 node, on the following step from the documentation for Upgrade Controllers, the commands to remove the e0a port from the cluster broadcast domain is not working with the following error

broadcast-domain remove-ports -ipspace Cluster -broadcast-domain Cluster -ports node:port

Error, 'system is not fully initialized', please wait some time and try the command again

  • The e0a and e0b port can be seen in the "network port show" output in the Cluster IPspace
  • This is not expected as e0a and e0b are the HA interconnect ports on the AFF A400

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.