Skip to main content
NetApp Knowledge Base

CRC errors received on all cluster ports

Views:
907
Visibility:
Public
Votes:
3
Category:
fabric-interconnect-and-management-switches
Specialty:
hw
Last Updated:

Applies to

  • FAS systems
  • AFF systems
  • ONTAP 9
  • Cluster Network Switch

Issue

  • All nodes cluster ports report CRC errors
  • Example, from nodeshell command ifstat:
::> node run -node Node01 -command ifstat -a

Node01
-- interface  e0a  (47 days, 8 hours, 15 minutes, 8 seconds) --

RECEIVE
 Total frames:      471m | Frames/second:     115  | Total bytes:       146g
 Bytes/second:    35870  | Total errors:     5565k | Errors/minute:      82
 Total discards:      0  | Discards/minute:     0  | Multi/broadcast:  2680k
 Non-primary u/c:     0  | CRC errors:       5554k | Runt frames:         0
 Fragment:            0  | Long frames:         0  | Jabber:              4
 Length errors:   10916  | No buffer:           0  | Xon:                 0
 Xoff:                0  | Pause:               0  | Jumbo:             113k
 Noproto:             0  | Error symbol:     1680k | Illegal symbol:   1360k
 Bus overruns:        0  | Queue drops:         0  | LRO segments:      409m
 LRO bytes:         137g | LRO6 segments:       0  | LRO6 bytes:          0
 Bad UDP cksum:       0  | Bad UDP6 cksum:      0  | Bad TCP cksum:       0
 Bad TCP6 cksum:      0  | Mcast v6 solicit:    0  | Lagg errors:         0
 Lacp errors:         0  | Lacp PDU errors:     0
  • There are no hardware errors on any connected switch ports

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.