Skip to main content
NetApp Knowledge Base

Bat 3.0V is critical low

  1. Last updated
  2. Save as PDF
Views:
438
Visibility:
Public
Votes:
1
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • FAS2554
  • FAS2520
  • ONTAP 9
  • ONTAP 8

Issue

  • EMS reports Bat 3.0V is critical low.

[?] Tue Aug 02 00:47:36 CST [Node A: env_mgr: monitor.chassisPower.degraded:warning]: Chassis power is degraded: Bat 3.0V is critical low (1387 mV). Please replace the CMOS coin cell battery.

  • SP-LATEST-IPMI  reports Bat_3.0V are failed.
Bat_1.5V         | 1.504      | Volts      | ok         | 1.280     | 1.348     | 1.649     | 1.727     
Bat_3.0V         | 1.430      | Volts      | cr         | 2.545     | 2.703     | 3.504     | 3.575     
Bat_8.0V         | 7.900      | Volts      | ok         | 6.000     | 6.600     | 8.600     | 8.700     
Bat_Curr         | 0.000      | Amps       | ok         | na        | na        | 0.800     | 0.900     
Bat_Capacity     | 2.304      | Amps*hour  | ok         | na        | na        | na        | na        
Bat_Run_Time     | 148.000    | hour       | ok         | 76.000    | 78.000    | na        | na        
Bat_Temp         | 27.000     | degrees C  | ok         | 0.000     | 10.000    | 55.000    | 64.000

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.