Skip to main content
NetApp Knowledge Base

AFF a700s powers off for MDP and is not accessible from BMC

  1. Last updated
  2. Save as PDF
Views:
85
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
HW
Last Updated:

Applies to

  • Ontap 9
  • AFF A700s

Issu

  • Both nodes panics because multiple disk go missing at the same time as seen in event logging
    Fri Nov 17 02:49:58 EST 2023  1/21/2024 02:03:05  aggr <AggrName>: raid volfsm, fatal multi-disk error..
  • One node does not boot and is not accessible from the BMC IP
  • Nodes attempts to boot but fails as seen BMC logs, we see multiple attempts to boot (this is one of many)  
    | 01/21/2025 | 00:37:34 | System Firmware Progress #0x00 | System boot initiated | Asserted      
    | 01/21/2025 | 00:41:20 | OS Stop/Shutdown #0xFF | OS graceful shutdown | Asserted
    | 01/21/2025 | 00:41:26 | System Firmware Progress #0x00 | Memory initialization | Asserted   
    ...
    | 01/21/2025 | 00:42:15 | Reserved #0x01 | Limit Not Exceeded | Asserted    
    | 01/21/2025 | 00:46:10 | OS Stop/Shutdown #0xFF | OS graceful shutdown | Asserted

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.