Skip to main content
NetApp Knowledge Base

A400 FC port down after node reboot

  1. Last updated
  2. Save as PDF
Views:
70
Visibility:
Public
Votes:
0
Category:
aff-series
Specialty:
hw
Last Updated:

 

Applies to

  • AFF A400
  • ONTAP 9

Issue

  • After takeover/giveback 0e and 0f port status is LINK DISCONNECTED

slot 0: Fibre Channel Target Host Adapter 0e
                (Emulex LPe16000 (XE201) rev. 13, <LINK DISCONNECTED>)
                Firmware rev:      12.8.433.0
                Host Port Addr:    000000
                FC Nodename:       50:0a:09:80:80:f6:8b:e3 (500a098080f68be3)
                FC Portname:       50:0a:09:83:80:f6:8b:e3 (500a098380f68be3)
                Connection:        No link
                Switch Port:       Unknown
        SFP Vendor Name:   AVAGO
        SFP Vendor P/N:    AFBR-57F5MZ-NA1
        SFP Vendor Rev:    01
        SFP Serial No.:    AC2240J02R5
        SFP Connector:     LC
        SFP Capabilities:  4, 8, 16 Gbit/Sec
        slot 0: Fibre Channel Target Host Adapter 0f
                (Emulex LPe16000 (XE201) rev. 13, <LINK NOT CONNECTED>)
                Firmware rev:      12.8.433.0
                Host Port Addr:    000000
                FC Nodename:       50:0a:09:80:80:f6:8b:e3 (500a098080f68be3)
                FC Portname:       50:0a:09:84:80:f6:8b:e3 (500a098480f68be3)
                Connection:        No link
                Switch Port:       Unknown
        SFP Vendor Name:   AVAGO
        SFP Vendor P/N:    AFBR-57F5MZ-NA1
        SFP Vendor Rev:    01
        SFP Serial No.:    AC2240J036P
        SFP Connector:     LC
        SFP Capabilities:  4, 8, 16 Gbit/Sec

  • The problem still exists after performing the following operations
    • Execute LIF and port donw/up
    • FC port reset
    • Swap cable
    • Replace swtich and storage port SFP       

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.