Skip to main content
NetApp Knowledge Base

CONTAP-768040: ANDU pre-update check for Ethernet switch support reports NX-OS 10.6(3), 10.6(2), 10.5(5), 10.4(6), or RCF 1.14 as "not supported" for N9K-C9336C-FX2

Views:
82
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

Issue

  • ONTAP Automated Nondisruptive Upgrade (ANDU) pre-update checks report an Ethernet switch support warning for the Cisco N9K-C9336C-FX2 in either of these cases:
    • The switch is running NX-OS 10.6(3), 10.6(2), 10.5(5), or 10.4(6).
    • The switch is using RCF 1.14 for the cluster, shared, or storage role.
  • The firmware warning names the installed NX-OS version, for example:
     The following Ethernet switch compatibility violations were found: <switch>: FW 10.4(6) not supported.

  • The same check reports RCF 1.14 with one of these warnings:
    • Shared cluster and storage RCF 1.14 not supported.
    • Cluster RCF 1.14 not supported.
    • Storage RCF 1.14 not supported.
  • On ONTAP 9.18.1 and later, the same status is shown by system switch ethernet support show.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.