Skip to main content
NetApp Knowledge Base

CONTAP-339641: Nodeshell "sysconfig -ac" output shows X60142A instead of X60141A for FC HBA

  1. Last updated
    Apr 2, 2025
  2. Save as PDF
Views:
6
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:
4/2/2025, 12:14:55 PM

Issue

  • Nodeshell "sysconfig -ac" CLI command output shows the part number of the Fibre Channel (FC) Target-only module (Board name: 111-05405) as X60142A, which is the incorrect part number.
  • The correct part number is X60141A.
  • An example of the incorrect output:
    sysconfig: slot 1 OK: X60142A: 4p 64Gb FC Target SFP+ Op
  • The correct output should be:
    sysconfig: slot 1 OK: X60141A: 4p 64Gb FC Target SFP+ Op

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.