Skip to main content
NetApp Knowledge Base

CONTAP-328784: Ethernet switch log collection fails for MetroCluster systems using the same user

  1. Last updated
  2. Save as PDF
Views:
6
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
HW
Last Updated:

Issue

After setting up Ethernet switch log collection using system switch ethernet log setup on an additional MetroCluster system, the switch reports below errors in MCCIP environment:
 
Switch1# show logging last 5
 Switch1 %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication failed from  X.X.X.X - dcos_sshd[4112]
 Switch1 %DAEMON-3-SYSTEM_MSG: error: PAM: Authentication failure for XXXXXX from X.X.X.X- dcos_sshd[4110]
 Switch1 %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication failed from  X.X.X.X- dcos_sshd[4113]
 Switch1 %DAEMON-3-SYSTEM_MSG: error: PAM: Authentication failure for XXXXXX from  X.X.X.X - dcos_sshd[4110]
 Switch1 %DAEMON-3-SYSTEM_MSG: error: maximum authentication attempts exceeded for XXXXXX from  X.X.X.X port 20901 ssh2 [preauth] - dcos_sshd[4110]

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.