Skip to main content
NetApp Knowledge Base

CFBMC-6632: BMC firmware upgrade from 13.7P1 to 13.10P1/13.11P1 causes “Unknown IPMI Completion Code” and BMC hang

Views:
32
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

Issue

Affects: BMC 13.x - AFF A400, AFF C400, ASA A400, ASA C400, FAS8300, FAS8700

  • During a BMC firmware update from version 13.7P1 to 13.10P1 or 13.11P1 , the following symptoms are observed:
    • Repeated console messages: Unknown IPMI completion code
    • BMC self-test: No Response and BMC IPMI communication failed
    • After a hard power‐cycle, BMC remains unresponsive, and the host fails to boot.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.