Skip to main content
NetApp Knowledge Base

What is Fast IO Timeout in the major event log ?

Views:
449
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg
Last Updated:

 

Applies to

  • NetApp StorageGRID
  • NetApp E-Series
  • E2600
  • E2700
  • E2800 & EF280
  • E5400 & EF540
  • E5500 & EF550
  • E5600 & EF560
  • E5700 & EF570
  • SANtricity Rev 11.x

Answer

  • A Fast IO Timeout is logged when a drive’s response time to a fast flagged READ, sent to the array from a host exceeds the Controller Firmware’s 'fastIOTimeout' value threshold.
  • When a Fast IO Timeout occurs, the drive is placed on probation for up to 60 seconds or until the next READ or WRITE completes

Additional Information

  • Events can be seen in the major event log ( MEL ) with text including, for Solution

IOP_FAST_TIMEOUT_ERROR, Detection

 

 

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.