Skip to main content
NetApp Knowledge Base

UCS SAN Boot Reference Documentation

  1. Last updated
  2. Save as PDF
Views:
1,199
Visibility:
Public
Votes:
7
Category:
flexpod-with-infrastructure-automation
Specialty:
san
Last Updated:

​

​

Applies to

  •  SAN    
  •  SAN Protocol 

Description

Connectivity related issues with Cisco UCS products can often be resolved by validating the configuration against the initial setup documentation. Below you will find documents for configuring Cisco UCS with NetApp storage. While most of the documentation is targeted at the Cisco/NetApp partnership program called Flexpod, it is important to note that these documents follow best practices put in place by both NetApp and Cisco.

If you are unable to find a guide that matches the your current configuration, there are additional guides available at  Cisco Flexpod Validated Designs as well as NetApp Validated Designs.

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.