Search

Upgrade task stuck in Cloud Manager
https://kb.netapp.com/Cloud/BlueXP/Cloud_Manager/Upgrade_task_stuck_in_Cloud_Manager
Applies to BlueXP NetApp Cloud Volumes ONTAP (CVO) Issue CVO upgrade was initiated via Cloud Manager but the ANDU never starts and the 'Update System Image' -task is stuck in 'pending' state in Cloud ...Applies to BlueXP NetApp Cloud Volumes ONTAP (CVO) Issue CVO upgrade was initiated via Cloud Manager but the ANDU never starts and the 'Update System Image' -task is stuck in 'pending' state in Cloud Manager timeline.
SCV triggered Snapvault fails due to missing Snapmirror Labels
https://kb.netapp.com/data-mgmt/SnapCenter/SC_KBs/SCV_triggered_Snapvault_fails_due_to_missing_Snapmirror_Labels
After an ONTAP upgrade SCV fails to add a label to the snapshot Error in Job Details in the SCV GUI: Resolution: Please make sure that secondary storage systems are registered and host can resolve the...After an ONTAP upgrade SCV fails to add a label to the snapshot Error in Job Details in the SCV GUI: Resolution: Please make sure that secondary storage systems are registered and host can resolve them correctly.) [ERR] ErrorCode (-1), ErrorMessage (Unable to find SnapVault destination for the source volume(s) Source and destination SVMs are successfully connected in SCV Pings/NSLookups/traceroutes to source and destination SVMs are successful from SCV instance
System Manager ONTAP 9.7 image upload fails with multipart/form-data error
https://kb.netapp.com/on-prem/ontap/DM/System_Manager/SM-KBs/System_Manager_ONTAP_9.7_image_upload_fails_with_multipart_or_form-data_error
System Manager ONTAP 9.7 image upload fails with multipart/form-data error. When attempting to upgrade a cluster to ONTAP 9.7 with a local software image upload from System Manager, the image upload f...System Manager ONTAP 9.7 image upload fails with multipart/form-data error. When attempting to upgrade a cluster to ONTAP 9.7 with a local software image upload from System Manager, the image upload fails
Root volume record not found for nodes during upgrade
https://kb.netapp.com/on-prem/ontap/Ontap_OS/OS-KBs/Root_volume_record_not_found_for_nodes_during_upgrade
Applies to ONTAP 9 ONTAP Upgrade VLDB (Volume Location Data Base) WAFL (Write Anywhere File Layout) Issue During ONTAP upgrade, the command cluster image validate returns an error : Cluster ::> cluste...Applies to ONTAP 9 ONTAP Upgrade VLDB (Volume Location Data Base) WAFL (Write Anywhere File Layout) Issue During ONTAP upgrade, the command cluster image validate returns an error : Cluster ::> cluster image validate -version 9.5P13 It can take several minutes to complete validation... Error: show failed: Root volume record not found for nodes: Cluster-Node1. Contact support personnel for assistance.
What version of ONTAP should I upgrade to?
https://kb.netapp.com/on-prem/ontap/Ontap_OS/OS-KBs/What_version_of_ONTAP_should_I_upgrade_to
Applies to ONTAP 9 Answer Refer to Choose your target ONTAP release for an upgrade Additional Information What are the Minimum Recommended ONTAP releases?
What open source or free web servers are available to assist with system administration
https://kb.netapp.com/on-prem/ontap/Upgrade/Upgrade-KBs/What_open_source_or_free_web_servers_are_available_to_assist_with_system_administration
If that is your situation you will need to configure the web server to listen on another unused port and then specify that port in the URL. (Officially port 8080 is assigned to http-alt but in reality...If that is your situation you will need to configure the web server to listen on another unused port and then specify that port in the URL. (Officially port 8080 is assigned to http-alt but in reality for local use only it can be anything between 1024-65535. Avoid using ports below 1024 other than port 80 for http or 445 for https.) The listening port is usually specified in the global configuration file for the server or passed as an argument on the commandline when starting the server.
How to perform a system health check after a Data ONTAP upgrade or hardware replacement: Resolution Guide
https://kb.netapp.com/on-prem/ontap/Ontap_OS/OS-KBs/How_to_perform_a_system_health_check_after_a_Data_ONTAP_upgrade_or_hardware_replacement__Resolution_Guide
The procedure to be followed to perform a system health check after a Data ONTAP upgrade or hardware replacement is described in this article. AutoSupports will need to be triggered from all nodes aft...The procedure to be followed to perform a system health check after a Data ONTAP upgrade or hardware replacement is described in this article. AutoSupports will need to be triggered from all nodes after the upgrade/replacement is complete.
Aggr degraded then recovery when ONTAP upgrade
https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Aggr_degraded_then_recovery_when_ONTAP_upgrade
Applies to ONTAP 9.8P12 FAS 9000 Issue Aggr degraded then recovery when ontap upgrade from ONTAP 9.7p8 to 9.8P12
ONTAP Upgrade got paused, as the new BIOS firmware was unable to load with "mSATA Read Error"
https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/ONTAP_Upgrade_got_paused_as_the_new_BIOS_firmware_was_unable_to_load_with_mSATA_Read_Error
SP logs showed: during upgrade the new BIOS firmware failed to load from boot device for Update and system landed at Loader prompt: mSATA Read Error: PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0x0,0x0) Faile...SP logs showed: during upgrade the new BIOS firmware failed to load from boot device for Update and system landed at Loader prompt: mSATA Read Error: PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0x0,0x0) Failed to load flash image: Error Record 77: Thu Feb 25 03:07:31.000000 2021 [SysFW.critical]: mSATA Read Error: PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0x0,0x0) Record 80: Thu Feb 25 03:07:33.000000 2021 [SysFW.notice]: Failed to update flash: Failed to load flash image.
Unable to upload ONTAP upgrade image via GUI
https://kb.netapp.com/on-prem/ontap/Ontap_OS/OS-KBs/Unable_to_upload_ONTAP_upgrade_image_via_GUI
Applies to OnCommand System Manager (OCSM) ONTAP System Manager Issue When trying to upload ONTAP image from a local client in System Manager, the upload fails with the following error File not upload...Applies to OnCommand System Manager (OCSM) ONTAP System Manager Issue When trying to upload ONTAP image from a local client in System Manager, the upload fails with the following error File not uploaded. This might be because file exceeds the maximum allowed size of 4096M or there is insufficient space.
ONTAP upgrade task aborted with error: failed to set field "vserver" to "x"
https://kb.netapp.com/on-prem/ontap/Ontap_OS/OS-KBs/ONTAP_upgrade_task_aborted_with_error__failed_to_set_field_vserver_to_x
The upgrade is not complete: an upgrade task aborted. Upgrade Task aborted due to "failed to set field "vserver" to "3"" Status Message: The upgrade aborted. Contact support personnel for the upgrade ...The upgrade is not complete: an upgrade task aborted. Upgrade Task aborted due to "failed to set field "vserver" to "3"" Status Message: The upgrade aborted. Contact support personnel for the upgrade repair procedure. Vers Phase Status Upgrade Phase Status Message 700 post-apps aborted failed to set field "vserver" to "3" The Vserver name must begin with a letter or an underscore. Status Message: The upgrade failed in the "post-apps" phase on task " OpenSSH 8.1 Upgrade/Revert Task".