Skip to main content
NetApp Knowledge Base

IPMI access to all compute nodes is failed

  1. Last updated
  2. Save as PDF
Views:
148
Visibility:
Public
Votes:
0
Category:
h-series
Specialty:
hci
Last Updated:

Applies to

H410E

Issue

IPMI access to all compute nodes is failed
  • Ping fails
  • Web page returns error:
ERR_Connection_Refused
ERR_Connection_Timed_Out
  • ipmitool command fails to contact IPMI.
admin@SF-xxxx ~ $ sudo ipmitool -I lanplus -H BMC_IP -U ADMIN -P Password sel list
Error: Unable to establish IPMI v2 / RMCP+ session
admin@SF-xxxx ~ $ sudo ipmitool -H BMC_IP -U ADMIN -P Password reset cold
Error: Unable to establish LAN session
Error: Unable to establish IPMI v1.5 / RMCP session
  • Direct connection cannot resolve this issue
  • Power drain from the compute node can temporarily resolve this issue but the same issue returns after about 15~20 minutes

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.