Skip to main content
NetApp Knowledge Base

Paths to the LUN from one controller not detected in RHEL 7

  1. Last updated
  2. Save as PDF
Views:
293
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
san
Last Updated:

Applies to

  • ONTAP 9.x
  • RHEL

Issue

  • Linux RHEL7 server detects paths to one controller only:

SVM_FC (3600a09803830446c485d4c4a33xxxxxx) dm-66 NETAPP ,LUN C-Mode

  size=5.0T features='4 queue_if_no_path pg_init_retries 50 retain_attached_hw_handle' hwhandler='1 alua' wp=rw

  `-+- policy='service-time 0' prio=50 status=active

    |- 2:0:7:0 sdds 71:160 active ready running

    `- 5:0:5:0 sddt 71:176 active ready running

  • Error messages in the server logs:

Mar 3 12:36:53 rhel kernel: sd 2:0:6:0: timing out command, waited 180s

Mar 3 12:36:55 rhel kernel: sd 5:0:6:0: timing out command, waited 180s

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.