Skip to main content
NetApp Knowledge Base

How to suppress SPNotConfiguredAlert

Views:
227
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
core
Last Updated:

Applies to

  • FAS2720
  • FAS2750
  • Service Processor(SP)

Description

SPNotConfiguredAlert is generated when customer is not willing to config the SP network.

Cluster::> system health alert show -instance
                      Node: Cluster-1
                   Monitor: controller
                  Alert ID: SPNotConfiguredAlert
         Alerting Resource: SP Config
                 Subsystem: Service-Processor
           Indication Time: Wed Sep 28 19:39:56 2022
        Perceived Severity: Major
            Probable Cause: Configuration_error
               Description: Service Processor is not properly configured.
        Corrective Actions: 1. Use the "system service-processor network modify" command to configure the network interface of the Service Processor.
                            2. Use the "system service-processor image modify -node Cluster-1 -autoupdate true" to configure AutoUpdate feature of the Service Processor.
                            3. Contact the technical support if the alert persists.
           Possible Effect: You might not be able to use the Service Processor to remotely access, monitor, and troubleshoot your storage system.
               Acknowledge: false
                  Suppress: false
                    Policy: SPNotConfiguredAlertPolicy
              Acknowledger: -
                Suppressor: -
    Additional Information: Status: online
                            Configured: false
                            Firmware Version: 5.10
                            Booted Version :  primary
                            Public Link Status:  down
                            Warning Count: 5
                            Link Warning Count: 5
    Alerting Resource Name: SP Config
     Additional Alert Tags: device

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.