Skip to main content
NetApp Knowledge Base

Data ports on multiple nodes connected to Cisco C9300 flapping

  1. Last updated
  2. Save as PDF
Views:
361
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
nas
Last Updated:

Applies to

  • FAS/AFF systems
  • Cisco C9300-24UX switch

Issue

  • Data ports on multiple nodes connected to the Cisco C9300-24UX switch are flapping and unstable
  • Both nodes and switch have Speed/Duplex settings configured to Auto

Wed Oct 20 11:23:12 -0400 [node1: mgmt_port_link_status_poll: netif.linkDown:info]: Ethernet e0d: Link down, check cable.
Wed Oct 20 11:23:13 -0400 [node1: mgmt_port_link_status_poll: netif.linkDown:info]: Ethernet e0e: Link down, check cable.
Wed Oct 20 11:23:13 -0400 [node1: mgmt_port_link_status_poll: netif.linkDown:info]: Ethernet e0c: Link down, check cable.
Wed Oct 20 11:23:13 -0400 [node1: mgmt_port_link_status_poll: netif.linkDown:info]: Ethernet a0a: Link down, check cable.
Wed Oct 20 11:23:15 -0400 [node1: vifmgr: vifmgr.portdown:notice]: A link down event was received on node node1, port e0d.
Wed Oct 20 11:23:16 -0400 [node1: vifmgr: vifmgr.portdown:notice]: A link down event was received on node node1, port e0e.
Wed Oct 20 11:23:16 -0400 [node1: vifmgr: vifmgr.portdown:notice]: A link down event was received on node node1, port e0c.
Wed Oct 20 11:23:16 -0400 [node1: vifmgr: vifmgr.portdown:notice]: A link down event was received on node node1, port a0a.

Wed Oct 20 11:23:12 -0400 [node2: mgmt_port_link_status_poll: netif.linkDown:info]: Ethernet e0d: Link down, check cable.
Wed Oct 20 11:23:12 -0400 [node2: mgmt_port_link_status_poll: netif.linkDown:info]: Ethernet e0c: Link down, check cable.
Wed Oct 20 11:23:15 -0400 [node2: vifmgr: vifmgr.portdown:notice]: A link down event was received on node node2, port e0d.
Wed Oct 20 11:23:15 -0400 [node2: vifmgr: vifmgr.portdown:notice]: A link down event was received on node node2, port e0c.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.