Controller attention LED on with set by SP
Applies to
- FAS8040
- FAS8020
- Service Processor (SP)
Issue
- Controller attention LED on.
- Set by SP can be found in the following command output.
ONTAP Cluster mode
Example:
cluster::*> system controller fru led show
Node FRU Type Bay Slot State Lit By
--------------------- ----------- --- ---- ------- -------
cluster-01
controller A 1 off -
pci - 1 off -
pci - 2 off -
pci - 3 off -
pci - 4 off -
batt-nv - 1 off -
boot - 1 off -
dimm-nv - 1 off -
dimm - 1 off -
dimm - 2 off -
dimm - 3 off -
dimm - 4 off -
cluster-02
controller B 1 on SP
pci - 1 off -
pci - 2 off -
pci - 3 off -
pci - 4 off -
batt-nv - 1 off -
boot - 1 off -
dimm-nv - 1 off -
dimm - 1 off -
dimm - 2 off -
dimm - 3 off -
dimm - 4 off -
Data ONTAP 8.2 7-mode
Example:
node*> fru_led status
Controller slot B: On (lit by SP)
DIMM slot 1: Off
DIMM slot 2: Off
DIMM slot 3: Off
DIMM-NV slot 1: Off
PCI slot 1: Off
PCI slot 2: Off
NV battery 1: Off
Boot device 1: Off