Skip to main content
NetApp Knowledge Base

Auto Load Balancing implicit volume transfer

  1. Last updated
  2. Save as PDF
Views:
866
Visibility:
Public
Votes:
0
Category:
e-series-santricity-os-controller-software
Specialty:
esg
Last Updated:

Applies to

  • NetApp E-series
  • SANtricity System Manager 11.30 or later

Issue

  • Recovery Guru reports NON_PREFERRED_PATH-Recovery Failure Type Code: 10
  • Fault LED of controller lights amber.
  • VMware vCenter reports the following error and the error resolves in a few seconds.
    Lost connectivity to storage device naa.xxxxxxxxxxxxxxxxx. Path vmhba70:C0:xxx:xxx is down. Affected datastores:xxxxxxx.
  • MEL report Auto Load Balancing implicit volume transfer

Date Time        Event Type    Description
2021-04-07 05:11:01    9104    Analysis of workload balance was performed
2021-04-07 04:10:49    9104    Analysis of workload balance was performed
2021-04-07 03:40:43    9106    The workload balance was evaluated following load optimization
2021-04-07 03:10:37    9105    Workload was automatically balanced by transferring volumes
2021-04-07 03:10:37    204A    Auto Load Balancing implicit volume transfer
2021-04-07 03:10:37    212C    Write-back caching fully restored
2021-04-07 03:10:37    2023    Media scan (scrub) completed
2021-04-07 03:10:37    210A    Controller cache not enabled or was internally disabled
2021-04-07 03:10:37    9104    Analysis of workload balance was performed
2021-04-07 03:10:37    2024    Media scan (scrub) resumed
2021-04-07 03:10:36    212C    Write-back caching fully restored
2021-04-07 03:10:36    210A    Controller cache not enabled or was internally disabled
2021-04-07 02:10:25    9104    Analysis of workload balance was performed
2021-04-07 01:10:13    9104    Analysis of workload balance was performed

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.