Skip to main content
NetApp Knowledge Base

Cluster service is abnormal after the system is started

Views:
377
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

Applies to

  • All AFF and FAS platforms
  • ONTAP
  • Power outage, controller relocation, or during upgrade or other reboot

Issue

  • Cluster communication between nodes is abnormal, and only the AGGR status of each node is displayed

Node02
Aggregate     Size Available Used% State   #Vols  Nodes            RAID Status
--------- -------- --------- ----- ------- ------ ---------------- ------------
aggr0_fas_cluster_01 -     -     - unknown      - node01   -
aggr0_fas_cluster_02 7.60TB 377.4GB 95% online  1 node02   raid_dp,
                                                                   normal
aggr1            -         -     - unknown      - node01   -
aggr2      176.1TB    5.01TB   97% online      19 node02   raid_tec,
                                                                   normal

Node01
Aggregate     Size Available Used% State   #Vols  Nodes            RAID Status
--------- -------- --------- ----- ------- ------ ---------------- ------------
aggr0_fas_cluster_01 
7.60TB   377.4GB   95% online                  1 node01   raid_dp,
aggr0_fas_cluster_02  -     -     - unknown      - node02   -
aggr1            -         -     - unknown      - node01   -
aggr2            -         -     - unknown      - node02   -

  • The cluster command failed on Node1

::> cluster show

Error: "show" is not a recognized command

::> set advanced

::*> cluster ring show

Error: "show" is not a recognized command

  • Check in the LOADER if the a values is stated for corrupt

LOADER-A> printenv

Variable Name        Value
-------------------- --------------------------------------------------
ARCH                 X86_64
AUTOBOOT             true
AUTOBOOT_FROM        PRIMARY
AUTO_FW_UPDATE       true
BACKUP_BIOS_VERSION  11.5
BIOS_DATE            Wed 02/27/2019
BIOS_INTERFACE       C3
BIOS_VERSION         11.5
BOARDNAME            SB_XXII
bootarg.cloud_optimized false
bootarg.frurom.fileid 538125770
bootarg.init.boot_clustered true
bootarg.init.dhclient.disable true
bootarg.init.switchless_cluster.enable 1
bootarg.init.trace_on_panic true
bootarg.kcs.clam.partnerState gb
bootarg.kcs.clam.quorumEpoch 110
bootarg.kcs.enable.chaaq? true
bootarg.keymanager.support true
bootarg.mgwd.scsi_blade_uuid ed80f948-0d64-11ea-a385-00a0984f2530
bootarg.nameservices.ypbind true
bootarg.nscache.enabled true
bootarg.nv2flash.discard.nvdata true
bootarg.pci_config_init.done true
bootarg.rdb_corrupt  5550055000
bootarg.setup.ngsh_debug true

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.