ANDU paused: node not in 'waiting for giveback' state due to Firmware update
Applies to
- ONTAP 9
- Automated Non-Disruptive Upgrade (ANDU)
- Cloud Volume ONTAP (CVO)
Issue
This article may apply if an ANDU is paused because the partner is not in a "waiting for giveback" state as indicated by either of these two methods:
1. EMS events upgrademgr.update.pausederr:ERROR
or the Autosupport EMS alert callhome.andu.pausederr:alert
:
Example:
[node-01: upgrademgr: upgrademgr.update.pausederr:ERROR]: The automated update of the cluster has been paused due to the following reason: Node "node-01": Error: {Node "node-02" is not in "waiting for giveback" state.}, Action: {Use the "storage failover show" to verify that node "node-02" is in one of the following states: "waiting for giveback" or "connected".}.
Autosupport EMS:
[node-01: notifyd: callhome.andu.pausederr:alert]: params: {'epoch': '91e735df-158b-4999-8546-5523299458af', 'subject': 'AUTOMATED NDU PAUSED'}
2. As shown in the cluster image show-update-progress
Example:
::> cluster image show-update-progress
Estimated Elapsed
Update Phase Status Duration Duration
-------------------- ----------------- --------------- ---------------
Pre-update checks completed 00:10:00 00:00:35
Data ONTAP updates paused-on-error 01:23:00 00:37:18
Details:
Node name Status Status Description
-------------------- ----------------- --------------------------------------
node-01 waiting
node-02 failed Error: Node "node-02" is not in
"waiting for giveback" state.
Action: Use the "storage failover
show" to verify that node
"node-02" is in one of the
following states: "waiting for
giveback" or "connected".
node-03 waiting
node-04 waiting
9 entries were displayed.
Status: Paused - An error occurred in "Data ONTAP updates" phase. The update cannot continue until the error has been
resolved. Resolve all issues, then use the "cluster image resume-update" command to resume the update.