- Alternate Control Path (ACP)
- ATTO FibreBridge
Is ACP supported in MetroCluster Configurations?
ACP support is independent of the use of ATTO FibreBridge usage or direct SAS attached configurations
- Not supported in any MetroCluster configuration
- Is supported if
IOM12 modules (DS460C) with ONTAP 9.2 and later are used
- IOM12 modules with ONTAP 9.1 and later are used
- If there is a combination of IOM12 and IOM6, In-band ACP should be disabled.
- In-band ACP is not supported with IOM6 modules and should be disabled.
For more details, see MetroCluster Installation and Configuration guide.