Skip to main content
NetApp Knowledge Base

Vserver failed to initialize during switchover

  1. Last updated
  2. Save as PDF
Views:
348
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
san
Last Updated:

Applies to

ONTAP 9.x

Issue

  • Vserver failed to initialize during switchover
  • EMS:

Sat Sep 05 2020 12:53:10 GMT [netapp-01: bii_lu_qry: scsiblade.vol.lun.stale.map:ERROR]: Could not lookup the volume with MSID '0xc0002abclu' in Vserver 'svm_01'. This is an indication that there might be stale lun maps  associated with the volume.
Sat Sep 05 2020 12:53:10 GMT [netapp-01: bii_lu_qry: scsiblade.vol.lun.stale.map:ERROR]: Could not lookup the volume with MSID '0xc0002abblu' in Vserver 'svm_01'. This is an indication that there might be stale lun maps  associated with the volume.
Sat Sep 05 2020 12:53:10 GMT [netapp-01: BcomkaThr_01: scsiblade.vol.init.failed:EMERGENCY]: SAN configuration in Vserver svm_01 failed to initialize  for volume with MSID 2147484718. Access to LUNs contained in  this volume from this node is not available.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.