Skip to main content
NetApp Knowledge Base

Read attempt failures on disk shelf

  1. Last updated
  2. Save as PDF
Views:
170
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

Applies to

  • ONTAP 9
  • AFF/FAS systems
  • Disk shelves

Issue

  • The environment status shows read attempts failed on the disk shelf:

::> system node run -node <node> environment status

Channel: 0b
    Shelf: 11
    SES device path: local access: 0b.11.99
    Module type: IOM12; monitoring is active  
    Shelf status: normal condition
    SES Configuration, shelf 11:
     logical identifier=0x500a09800ea85dc4
     vendor identification=NETAPP  
     product identification=DS460-12
     product revision level=0290
    Vendor-specific information:
     Product Serial Number: SHJHU2211000471
    Status reads attempted: 5639267; failed: 1
    Control writes attempted: 0; failed: 0

  • Upon monitoring, the failed counters are found to be not incrementing.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.