Performance issues while accessing the luns on host
Applies to
- ONTAP 9
- FCP
- SAN
Issue
- Slowness while trying to access luns on host
- Multiple errors are observed in
EMS-LOG-FILE.GZ
:
Wed Nov 03 02:02:59 CET [xxxxxx: fct_tpd_work_thread_0: fcp.io.status:debug]: STIO Adapter:xx IO WQE failure, Handle 0x0, Type 8, S_ID: 700D00, VPI: 3, OX_ID: 674, Status 0x3 Ext_Status 0x16
Wed Nov 03 02:13:11 CET [xxxxxxx: fct_tpd_work_thread_0: fcp.io.status:debug]: STIO Adapter:xx IO WQE failure, Handle 0x1, Type 8, S_ID: 711300, VPI: 259, OX_ID: 442, Status 0x3 Ext_Status 0x16
Wed Nov 03 06:22:37 CET [xxxxxxxxx: fct_tpd_work_thread_0: fcp.io.status:debug]: STIO Adapter:xx IO WQE failure, Handle 0x0, Type 8, S_ID: 7B0C00, VPI: 3, OX_ID: 20C, Status 0x3 Ext_Status 0x16
Wed Nov 03 06:57:49 CET [xxxxxxxx: fct_tpd_work_thread_0: fcp.io.status:debug]: STIO Adapter:xx IO WQE failure, Handle 0x1, Type 8, S_ID: 7A0D00, VPI: 259, OX_ID: 248, Status 0x3 Ext_Status 0x16
- The cable between the front-end switch and ONTAP is replaced; no change
- There's a trend of degrading Tx/Rx value in which can be verified with the command:
Cluster::> fcp adapter show -node xxxxx -adapter xx