Skip to main content
NetApp Knowledge Base

Detected firmware fault 0xffffffff on SAS adapter 0c

Views:
215
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • FAS 80x0
  • ONTAP 9

Issue

  • SAS adapter has detected a firmware fault
  • SAS adapter resets itself and recovers automatically
Mon Jan 30 03:31:45 [node01: pmcsas_timeout_1: sas.adapter.firmware.fault:notice]: Detected firmware fault 0xffffffff on SAS adapter 0c.
 
Mon Jan 30 03:31:48 [node01: pmcsas_timeout_1: sas.adapter.exception:debug]: SAS adapter driver encountered error "Failed to get a response in state 43" on adapter 0c.
Mon Jan 30 03:31:48 [node01: pmcsas_asyncd_1: sas.adapter.exception:debug]: SAS adapter driver encountered error "ASYNC SMP timed out -- ABORTING" on adapter 0c.
Mon Jan 30 03:31:49 [node01: pmcsas_timeout_1: sas.device.quiesce:debug]: Adapter 0c encountered a command timeout on disk device 0c.40.0. Quiescing the device.
 
Mon Jan 30 03:31:54 [node01: pmcsas_timeout_1: sas.adapter.exception:debug]: SAS adapter driver encountered error "Failed to get a response in state 46" on adapter 0c.
Mon Jan 30 03:31:54 [node01: pmcsas_asyncd_1: sas.adapter.exception:debug]: SAS adapter driver encountered error "ASYNC SMP ABORT timed out" on adapter 0c.
Mon Jan 30 03:31:54 [node01: pmcsas_asyncd_1: sas.adapter.debug:info]: params: {'debug_string': 'Adapter debug dump is being collected', 'adapterName': '0c'}
Mon Jan 30 03:31:55 [node01: pmcsas_asyncd_1: sas.adapter.reset:debug]: Resetting SAS adapter 0c.
Mon Jan 30 03:31:55 [node01: pmcsas_asyncd_1: sas.adapter.not.ready:error]: SAS adapter 0c did not become ready.
 
Mon Jan 30 03:31:59 [node01: pmcsas_timeout_1: sas.adapter.debug:info]: params: {'debug_string': "PHYs didn't come up.", 'adapterName': '0c'}
Mon Jan 30 03:32:00 [node01: pmcsas_asyncd_1: sas.adapter.debug:info]: params: {'debug_string': 'Port 0: disabled 0, up 0, down 4: old state 3 --> new state 1', 'adapterName': '0c'}
Mon Jan 30 03:32:00 [node01: pmcsas_asyncd_1: sas.adapter.debug:info]: params: {'debug_string': 'Port 1: disabled 0, up 0, down 4: old state 3 --> new state 1', 'adapterName': '0c'}
Mon Jan 30 03:32:00 [node01: pmcsas_admin_1: sas.adapter.debug:info]: params: {'debug_string': 'PHY UP [0] RATE 0x4 PS 0x1, NPIP 1 :: DEVTYPE 0x20, TGT 0x2, INIT 0x2, ADDR 500a098007ae05ff', 'adapterName': '0c'}
Mon Jan 30 03:32:00 [node01: pmcsas_admin_1: sas.adapter.debug:info]: params: {'debug_string': 'PORT UP -- 0c', 'adapterName': '0c'}
Mon Jan 30 03:32:00 [node01: pmcsas_admin_1: sas.adapter.debug:info]: params: {'debug_string': 'PHY UP [1] RATE 0x4 PS 0x1, NPIP 2 :: DEVTYPE 0x20, TGT 0x2, INIT 0x2, ADDR 500a098007ae05ff', 'adapterName': '0c'}
Mon Jan 30 03:32:00 [node01: pmcsas_admin_1: sas.adapter.debug:info]: params: {'debug_string': 'PHY UP [2] RATE 0x4 PS 0x1, NPIP 3 :: DEVTYPE 0x20, TGT 0x2, INIT 0x2, ADDR 500a098007ae05ff', 'adapterName': '0c'}
Mon Jan 30 03:32:00 [node01: pmcsas_admin_1: sas.adapter.debug:info]: params: {'debug_string': 'PHY UP [3] RATE 0x4 PS 0x1, NPIP 4 :: DEVTYPE 0x20, TGT 0x2, INIT 0x2, ADDR 500a098007ae05ff', 'adapterName': '0c'}
Mon Jan 30 03:32:00 [node01: pmcsas_admin_1: sas.adapter.debug:info]: params: {'debug_string': 'PHY UP [4] RATE 0x4 PS 0x1, NPIP 1 :: DEVTYPE 0x20, TGT 0x2, INIT 0x2, ADDR 500a098008004a7f', 'adapterName': '0c'}
Mon Jan 30 03:32:00 [node01: pmcsas_admin_1: sas.adapter.debug:info]: params: {'debug_string': 'PORT UP -- 0d', 'adapterName': '0c'}
Mon Jan 30 03:32:00 [node01: pmcsas_admin_1: sas.adapter.debug:info]: params: {'debug_string': 'PHY UP [5] RATE 0x4 PS 0x1, NPIP 2 :: DEVTYPE 0x20, TGT 0x2, INIT 0x2, ADDR 500a098008004a7f', 'adapterName': '0c'}
Mon Jan 30 03:32:00 [node01: pmcsas_admin_1: sas.adapter.debug:info]: params: {'debug_string': 'PHY UP [6] RATE 0x4 PS 0x1, NPIP 3 :: DEVTYPE 0x20, TGT 0x2, INIT 0x2, ADDR 500a098008004a7f', 'adapterName': '0c'}
Mon Jan 30 03:32:00 [node01: pmcsas_admin_1: sas.adapter.debug:info]: params: {'debug_string': 'PHY UP [7] RATE 0x4 PS 0x1, NPIP 4 :: DEVTYPE 0x20, TGT 0x2, INIT 0x2, ADDR 500a098008004a7f', 'adapterName': '0c'}
Mon Jan 30 03:32:00 [node01: pmcsas_asyncd_1: sas.adapter.debug:info]: params: {'debug_string': 'Port 0: disabled 0, up 4, down 0: old state 1 --> new state 3', 'adapterName': '0c'}
Mon Jan 30 03:32:00 [node01: pmcsas_asyncd_1: sas.adapter.debug:info]: params: {'debug_string': 'Port 1: disabled 0, up 4, down 0: old state 1 --> new state 3', 'adapterName': '0c'}
Mon Jan 30 03:32:03 [node01: pmcsas_asyncd_1: sas.adapter.debug:info]: params: {'debug_string': 'Transition Comparing this: [IOM6] and next: [IOM6] ...', 'adapterName': '0c'}
Mon Jan 30 03:32:03 [node01: pmcsas_asyncd_1: sas.adapter.debug:info]: params: {'debug_string': 'Asyncd device scan done.', 'adapterName': '0c'}
Mon Jan 30 03:32:03 [node01: pmcsas_asyncd_1: sas.adapter.debug:info]: params: {'debug_string': 'device_count: expected 144 (144), registered 144', 'adapterName': '0c'}
Mon Jan 30 03:32:04 [node01: pmcsas_timeout_1: sas.adapter.debug:info]: params: {'debug_string': 'Stop kicking open SDM batch window.', 'adapterName': '0c'}
  • SAS adapter firmware version is 01.12.09.00
slot 0: SAS Host Adapter 0c (PMC-Sierra PM8001 rev. C, SAS, <UP>)
Firmware rev:       01.12.09.00
Base WWN:           5:xxxxxx:xxxxxxx:xx
Phy State:          [0] Enabled, 6.0 Gb/s
[1] Enabled, 6.0 Gb/s
[2] Enabled, 6.0 Gb/s
[3] Enabled, 6.0 Gb/s
QSFP Vendor:        Amphenol
QSFP Part Number:   X6594-R6+A0
QSFP Type:          Passive Copper 0.5m ID:01
QSFP Serial Number: xxxxxxxxxxxxx

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.