Skip to main content
NetApp Knowledge Base

ACP Processor error for SAS shelf ACP processor 'X'

Last Updated:

Applies to



Symptom 1

The following shelf fault errors are displayed:

Sat Mar 19 22:41:51 EST [xxx:ses.status.ACPError:CRITICAL]: DS4246 (S/N XXXXXXXXX) shelf 11 on channel 2c ACP Processor error for SAS shelf ACP processor 2: critical status ; Alternate Control Path hardware failed This module is on the rear of the shelf at the bottom center, on shelf module B.

Sat Mar 19 22:41:54 EST [xxx:monitor.shelf.fault:CRITICAL]: Fault reported on disk storage shelf attached to channel 1b. Check fans, power supplies, disks, and temperature sensors. Sat Mar 19 22:41:54 EST [xxx:callhome.shlf.fault:error]: Call home for SHELF_FAULT

Symptom 2

The STORAGE-ACP logs display the following status:

ACP Connectivity Status: Partial Connectivity

A>      Shelf Module Reset Cnt IP Address FW Version Module Type Status

----------------- ------------ --------------- ------------ ------------ -------

2c.11.B 000   02.08   IOM6   inactive (rebooting

B>     Shelf Module Reset Cnt IP Address FW Version Module Type Status

----------------- ------------ --------------- ------------ ------------ -------

2c.11.B  000  02.08   IOM6   not-responding (last contact at: "Sat Mar 19 22:32:42 EST 2016")

Symptom 3

filer>storage show fault

Enclosure Status: critical

Channel: 1b

Shelf: 11

Shelf Type: DS4246

Product Serial Number: XXXXXXXXX

Module Type: IOM6

. . .

Vendor Unique Element 85-IOM6: (ACP)

Element Status Status Bytes Status Descriptions

1 [IOM6 A] : OK 01,70,00,80

2 [IOM6 B] : CRITICAL 02,00,00,40 FAIL

Symptom 4

filer>environment status shelf

Module type: IOM6; monitoring is active

Shelf status: critical condition

SES Configuration, shelf 11:

. . . .

ACP installed element list: 1, 2; with error: 2


Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device