Skip to main content
NetApp Knowledge Base

FC-VI/Storage adapter/Host target adapter link does not come online with 16g QLogic card

  1. Last updated
  2. Save as PDF
Views:
384
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

​ ​

Applies to

  • QLogic 16g capable card (X1928,X1143A)
  • Fabric MetroCluster
  • Stretch MetroCluster

Issue

The link does not come online, however, it is seen as In_Sync on the switch (example of an FC-VI card):
switch1::> switchshow
    Index Port Address Media Speed       State   Proto
    ==================================================
       0   0   050000   id    16G     In_Sync      FC  <-- QLogic port
       1   1   050100   id    8G       Online      FC  F-Port  50:0a:09:82:03:6a:c7:c0
       2   2   050200   id    8G       Online      FC  F-Port  50:0a:09:83:03:6a:c7:c0
       3   3   050300   id    16G     In_Sync      FC  <-- QLogic port
       4   4   050400   id    8G       Online      FC  F-Port  50:0a:09:82:03:6a:d5:a0
       5   5   050500   id    8G       Online      FC  F-Port  50:0a:09:83:03:6a:d5:a0

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.